Safety Instruction; Notes On Operation - AEG AXP26V578HW User Manual

Table of Contents

Advertisement

Available languages

Available languages

6
www.aeg.com
• To ensure proper drainage, the drainage hose must
have no kinks and must not be elevated during
dehumidificatioin mode. If not, the drained water may
spill out into the room.
• The temperature around the drainage hose must not
be below freezing point when used. Drained water may
freeze inside the hose, causing water inside the unit to
overflow into the room.
• Do not block the exhaust air outlet with obstacles. Cooling
performance may be reduced or stop completely.
• Provide a residual current device (ROD) in order to
protect against electric shock in accordance with British
Standard and Wiring Rules.
• Exposure to direct airflow for an extended period of
time could be hazardous to your health. Do not expose
occupants, pets, or plants to direct airflow for extended
periods of time.
• Do not use this air conditioner for non-specified special
purposes (e.g. preserving precision devices, food, pets,
plants, and art objects). Usage in such a manner could
harm such property.

2. SAFETY INSTRUCTION

2.1 Notes on Operation

• Allow 3 minutes for the compressor
to restart cooling. If you turn the air
conditioner off and immediately restart
it, allow 3 minutes for the compressor
to restart cooling. There is an electronic
device in the unit that keeps the
compressor turned off for 3 minutes
for safety.
• In the event of a power failure during
use, allow 3 minutes before restarting
the unit. After power is reinstated,
restart the air conditioner. If the power
was off for less than three minutes,
be sure to wait at least three minutes
before restarting the unit. if you
restart the air conditioner within three
minutes, a protective device in the unit
may cause the compressor to shut off.
This protective device will prevent
cooling for about 5 minutes. Any
previous setting will be cancelled and
the unit will return to its initial setting.
• Low temperature operation: Is your
unit freezing up? Freezing may occur
when the unit is set close to 18°C in
low ambient temperature conditions,
especially at night. In these conditions,
a further temperature drop may cause
the unit to freeze. Setting the unit to a
higher temperature will prevent it from
freezing.
• Dehumidification mode increases
room temperature. The unit generates
heat during dehumidification mode
and the room temperature will rise.
Warm air will be blown out from the
exhaust air outlet, but this is normal
and does not indicate a problem with
the unit.
• This air conditioner blows the warm air
generated by the unit outside the room

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents