Auto Mode - Soleus Air 3046364 Operating Instructions Manual

Auto Mode

1) Install the exhaust hoses and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button on the control panel.
4) Press the MODE button until the "
by pressing the FAN SPEED button.
NOTE: During AUTO mode, the unit operates in Heating mode when the room temperature is below 68
Dehumidifier mode when the room temperature is between 68
the room temperature is above 80
Sleep Mode (This mode can only be selected when using the Remote control )
1) To set Sleep mode, make sure the unit is in Air Conditioner mode.
2) Press the SLEEP Button on the remote control. The "
3) When in SLEEP mode, the fan will run on low to keep fan noise at a minimum.
4) When in Air Conditioner mode, the temperature setting will gradually increase to 2
temperature for 6 hours. After 6 hours the temperature setting will return to the set temperature.
5) When in Heating mode, the temperature setting will gradually decrease to 2
perature for 6 hours. After 6 hours, the temperature setting will return to the set temperature.
6) When in Dehumidifier mode, the temperature will not change when Sleep mode is selected.
Air Purifier Mode - See Page 13
Compressor Indicator
The icon will light up on the control panel display when the compressor turns on. The
turn off when the compressor shuts off.
" icon appears on the control panel display. Select the fan speed
°
F.
° °
F to 80 F. And Air Conditioner mode when
" icon appears on the control panel display.
°
F below the original set tem-
°
F,
°
F above the original set
icon will
12