Grecom PSR-800 Owner's Manual page 77

Code
03-00 No MicroSD Card
inserted
03-01 General error
initializing file
system
03-02 Cluster size bad
03-03 Error reading
MicroSD card
03-04 Error writing
MicroSD card
03-05 MicroSD Card is
full
03-06 MicroSD Card is
write protected
03-07 Mass storage
mode is active
03-08 Unknown
MicroSD card
read/write error
PSR-800 User Manual!
Meaning
Ensure that a properly formatted MicroSD card is
fully inserted and locked in the MicroSD slot.
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application "Prepare SD Card for use" option.
Replace the MicroSD card if the problem persists.
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application "Prepare SD Card for use" option.
Replace the MicroSD card if the problem persists.
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application "Prepare SD Card for use" option.
Replace the MicroSD card if the problem persists.
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application "Prepare SD Card for use" option.
Replace the MicroSD card if the problem persists.
Reduce size of configuration, remove
unnecessary audio recordings or switch to a
MicroSD card with more capacity.
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application "Prepare SD Card for use" option.
Replace the MicroSD card if the problem persists.
Under normal conditions this error should not
appear. Mass storage device mode is disabled
when the scanner is connected to a computer and
scanning. Disconnect the radio from the computer,
wait a few seconds, then reconnect. Contact GRE
Support if the problem persists.
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application "Prepare SD Card for use" option.
Replace the MicroSD card if the problem persists.
Corrective Action
Page 76