Searching; Spectrum Sweeper; Main Menu; Sweeper Menu - Grecom PSR-800 Owner's Manual

before they are reported by local radio and television media. The
Skywarn Scanlist works like any other the PSR-800 Scanlist. It
can be enabled and disabled for scanning along with the 200
regular Scanlists. The Skywarn Scanlist can also be accessed
quickly by pressing the
Monitor mode. When activated from Weather Monitor mode, all
other Scanlists are temporarily disabled, and only objects
mapped to the Skywarn Scanlist will be monitored.

Searching

Your PSR-800 features several search modes to help you find
more frequencies to listen to. When the PSR-800ʼs search
modes find a new active frequency, you have the option to store
it to the default Scanlist, where you can include stored search
hits for normal scanning or review them later on using the
PSR-800 PC Application.

Spectrum Sweeper

Your PSR-800 features GREʼs innovative Spectrum Sweeper
technology, which can rapidly sweep through a range of
frequencies and find transmissions from nearby sources.
To use Spectrum Sweeper, press the
Main Menu, then use the  key to scroll down to the Search
option. Press the  key to proceed to the Search menu. Scroll
to the Spectrum Sweeper option and press the  key to proceed
to the next menu. Select All Bands to perform a Spectrum
Sweeper search on all common land mobile radio bands, or
select Public Safety to perform a faster Spectrum Sweeper
search on frequency ranges commonly used for public safety
communications. The PSR-800 will immediately begin to sweep
the frequency ranges you have selected. To block reception of
undesired signals found while using Spectrum Sweeper, press
the
To change the Spectrum Sweeper options, press the
while Spectrum Sweeper is active. The following options are
available:

Main Menu

Navigates to the PSR-800ʼs Main Menu

Sweeper Menu

Navigates to the Spectrum Sweeper Menu
PSR-800 User Manual!
SKIP
key.
key while the PSR-800 is in Weather
MENU
key to access the
MENU
key
Page 52