IMPORTANT
Please read and understand before
operating machine.
1. Pre-check all nuts, bolts, grub screws for tightness
prior to operating machine.
2. Understand the operating procedures and the
controls before operating.
3. Use the machine to roll 18-36 greens then check
that all nuts, bolts etc. are tight. If loose and the
Loctite seal has been broken, treat item as per
Loctite instructions, reseal, then tighten securely.
4. Loose transmission and drive roller sprockets will
cause damage to shafts and keyways. Ensure they
are correctly tightened at all times.
5. Change the transmission oil after 50 hours of
operation, then as per the servicing schedule.
R50-11 Owners Manual
We use and recommend Penrite Synthetic 5 SAE
5W-60. Available through our dealer network or use
an equivalent synthetic oil.
U.S.A. customers contact your dealer or visit www.
truturf.com to find your nearest dealer.
Australian customers call 07 5594 7199.
International customers contact your dealer or visit
www.truturf.com to find your nearest dealer.
www.turturf.com
3
Need help?
Do you have a question about the R50-11 and is the answer not in the manual?