Step 4: Insert The Card; Step 5: Set Up The Dial-Up Connection - Socket 56K Modem Card User Manual

STEP 4: Insert the Card

Note: If you installed Socket's WhereAreYou? software, you
may want to use it now to set up the modem card for your
country. You must start this process BEFORE inserting the
card. For instructions, go to page 32.
Insert the 56K Modem Card into your mobile computer, with the gray label
on top. If using a PC Card slot, first plug the card into a CompactFlash-to-
PC Card adapter.
Plug the card
directly into a
CompactFlash
I/O slot.
Warning! Do NOT insert the card upside down, or damage may occur!
When you insert the card, the Power and Data Status LEDs will blink then
turn off.

STEP 5: Set up the Dial-up Connection

The process for setting up a dial-up connection differs between Pocket PC
2000/2002/2003, and Handheld PC devices. In the following pages, find the
instructions for your specific type of Windows CE-based mobile computer.
You will need your dial-up information for this step. For most devices, this
step involves two separate parts: making a new connection and entering the
dialing settings.
OR
CHAPTER 2: SETUP FOR WINDOWS CE | 9
Insert card into
an adapter for
use in a PC
Card slot.