Step 3: Insert The Card - Socket 56K Modem Card User Manual

STEP 3: Insert the Card

1. Insert the 56K Modem Card into a CompactFlash-to-PC Card adapter,
with the gray label on top.
2. With the computer turned ON, insert the card-plus-adapter unit into the
PC Card slot of your computer.
3. After a few seconds, a new hardware or device driver wizard will
automatically launch. Proceed to Step 4 to complete the wizard to
install the drivers.
Warning! Do NOT insert the card upside down, or damage may occur!
When you insert the card, the Power and Data Status LEDs will blink once
then turn off.
44 | CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP