Fcc Statement - YUNEEC Mantis Q Quick Start Manual

Camera Usage Warnings
NOTICE
For the latest product information, please check our official website:
www.yuneec.com.
WARNING
Do not expose the lens of the camera to extreme light sources.
Do not operate the camera in the rain or in environments with high humidity.
Do not try to repair the camera. Repairs must go to an authorized service center.
WARNING
Read the entire instruction manual to become familiar with the features of the
product before operating.
Do not use with incompatible components or alter this product in any way
outside of the instructions provided by Yuneec.
Failure to use this product in the intended manner as described in instruction
manual can result in damage to the product, property and/or cause serious injury.

FCC Statement

This equipment has been tested and found to comply with the limits for Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructionsand must not be co-located or operating
conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure compliance.
The SAR limit adopted by US is 1.6 W/kg averaged over 1gram of tissue. The highest SAR value for this device type
when properly worn on the body is 1.18 W/kg.
The antennas used for this transmitter must be installed to provide a separation distance of at least 10mm from body.