Returning Menu Settings To Their Factory Default - Sony DVCAM DSR-60P Operating Instructions Manual

Changing Menu Settings
4
When you have completed the settings, press the
SET (YES) [MARK] button.
The message "NOW SAVING..." appears on the
monitor screen, and "Saving..." appears in the time
counter display, while the new settings are saved in
the unit's memory.
When the saving operation is completed, the
monitor screen and time counter display return to
their normal indications.
Returning Menu Settings to Their
Factory Default
After making menu setting changes, to return settings
to their factory defaults, use the following procedure.
To return a specific menu setting to its
factory default
Go to the menu screen that is used to select the item's
settings, then press the RESET (NO) button.
Carry out the procedure in the section "Changing
Settings of Basic Items" (page 37) up to step 6, then
with the list of the setting displayed (in the example, if
the setting has been changed it will be "66%" or
"33%") press the RESET (NO) button, to return the
setting to its factory default of "100%".
To return all menu settings to their factory
defaults
1
Press the MENU button to get the menu selection
level display.
2
Press the [B]÷ button to get the level-1 menu
display of the setup menu.
3
Press the RESET (NO) button.
A message will be displayed to prompt you to
confirm the reinitialization.
Message on monitor
screen
Message on time
counter display
40
Chapter 4 Menu Settings
"INITIALIZE ALL ITEMS TO
FACTORY PRESET
VALUES?"
"Init setup?"
4
Press the SET (YES) [MARK] button.
The message "NOW SAVING..." is displayed on
the monitor screen and "Saving..." is shown on the
time counter display, and the new settings are
saved in memory.
Caution
If you power off this unit while it is in the process
of saving the settings, the reinitialization cannot be
ensured. Wait until saving is completed before
powering off the unit.
To cancel reinitialization
Press the RESET (NO) button instead of the SET
(YES) [MARK] button. The display will return to
the level-1 menu display without reinitialization of
the menu settings.