Stanley SXEW174001 Manual page 11

HOSE HOLDER (PIC. 4A)
PIC. 4A
Fit hose holder by;
1. Hold holder against the handle
2. Secure with 4 screws and tighten fully.
HANDLE (PIC. 4B)
Fit handle by;
1. Push handle onto pressure washer frame.
2. Secure with 2 screws and tighten fully by hand.
PRESSURE HOSE TO PUMP CONNECTION (PIC. 5)
To connect hose;
1. Push lever in towards the left and push the hose fitting in,
release the lever. Hose fitting should be locked in place.
PIC. 4B
PIC. 5
11