Unpacking & Assembly Instructions - Stanley SXEW174001 Manual

UNPACKING & ASSEMBLY
UNPACKING
Note: Carefully unpack your pressure washer. Dispose of all
packing material in an environmentally responsible manner.
Open carton, gently lift the pressure washer clear of the carton
and packaging, Remove from plastic bag.
Note: Plastic bags can be a danger to young children,
dispose of immediately. Always dispose of packaging in
a responsible manner.
Your Pressure Washer needs minor assembly before use
CONNECTING LANCE TO GUN (PIC. 2)
• Push the lance into the gun firmly.
• Then twist the lance clockwise while still pushing in.
• This will lock the lance in to position.
CONNECTING NOZZLE TO LANCE (PIC. 3A)
• Push the red button on the lance in firmly.
• Then push in the selected nozzle.
• Release the red nozzle and ensure the nozzle
is firmly fitted.
• This will lock the lance in to position.
SELECTING NOZZLE
This pressure washer is supplied with 2 different nozzles, see
page 14 for details;
• An adjustable nozzle.
• A turbo nozzle.
HOLDERS (PIC. 3B)
1. Power cord holder in on the "power cord" side.
2. To fit slide down onto the lug and push down till it
locks in place.
3. Gun holder is on the other side.
4. To fit slide down onto the long lug
PIC. 2
PUSH IN LANCE AND TWIST TO LOCK
PIC. 3A
PIC. 3B
POWER
CORD
HOLDER
10
GUN
HOLDER