Mitsubishi Electric Lossnay series Technical Manual page 105

•
CHAPTER 11 Lossnay Q and A
Question
Is total operation possible
15
via the switches?
What is the difference
16 between the rotary-type and
static-type?
Is an inspection hole
17
necessary?
What must be performed
18
during maintenance?
Can the Lossnay be used in
19
factories?
What are the anti-vibration
20
measures for Lossnay units?
* Please consult with the nearest Lossnay supplier about part availability.
U-96
Several units can be operated with the optional control switch.
Refer to "Chapter 3, Section 8 Comparing Energy Recovery Techniques."
For the ceiling-embedded-type, the unit is installed in the false ceiling, so an
inspection hole is required to access the Core and filter, section and for fan
maintenance.
Refer to the installation manual for details.
Periodic inspection and cleaning of the Lossnay Core and air filter is
necessary. Refer to "Chapter 9, Service Life and Maintenance" for details.
Do not install in machine or chemical factories, where hazardous substances
such as acidic gases, alkaline gases, organic solvent fumes, paint fumes, or
gases containing corrosive components are generated.
Measures are not required.
Answer Remarks