Omron Pocket Pain Pro PM400 Instruction Manual page 29

If this happens...
Pad Light is blinking.
If the above measures are not effective, contact us at 1-800-634-4350.
11. TROUBLESHOOTING
Possible causes...
Are both pads attached to the
body?
Have you removed the
transparent film from the
pad?
Is the cord properly
connected to the main unit?
Is the adhesive surface of
pads dirty or dry?
29
Try this solution...
Re-attach dislocated pad(s)
onto the skin firmly.
Peel off film on the adhesive
surface of pads.
Connect cord plug correctly
into the jack at the bottom of
the main unit.
Wash adhesive surface
of pads softly with your
fingertips for about 3
seconds under slow running
cold water.