Red Technology MAGIC-2 Instruction Manual page 26

ToolPath Creation Properties
Engraving Method
Tool
Hatching Interval
Margin
Hatching interval, depth, engraving speed, etc, for each material are set up
in advance. Therefore, you don't have to appoint hatching interval, depth,
engraving speed, etc. every time and if you select engraving option, value
appointed in advance is automatically set up. You can change it in
engraving option setup window by pressing Edit or Add button on value set
up in advance.
Engraving tool is set up. Value set up in advance can be changed in tool
setup window by pressing Add or Edit button.
Appoint hatching distance.
0.1mm 0.2mm
Appoint margin of original content and tool path
0.1mm 0.2mm
0.3mm
0.3mm
25