About This Document; Revision History; Before You Start; Trademarks - Siemens QMX3.P37 Technical Principles

Revision Date
_01 July 2013
4/40
Siemens
Building Technologies
1

About this document

1.1

Revision history

Changes
First edition
1.2

Before you start

1.2.1

Trademarks

The trademarks used in this document and their lawful owners are listed in the
table below.. The use of trademarks is subject to international and domestic
provisions of the law.
Trademark(s)
KNX®
All product names listed in the table are registered (®) or not registered (™)
trademarks of the owner listed in the table. These trademarks will not be indicated
elsewhere in the text (e.g. by use of symbols such as ® and ™) due to the
reference in this Section and to facilitate the reading of the text,
1.2.2

Copyright

This document may be duplicated and distributed only with the express permission
of Siemens, and may be passed only to authorized persons or companies with the
required technical knowledge.
1.2.3

Quality assurance

These documents were prepared with great care.
• The contents of all documents are checked at regular intervals.
• All necessary corrections are included in subsequent versions.
• Documents are automatically amended as a consequence of modifications and
corrections to the products described.
Please make sure that you are aware of the latest document revision date.
If you find any lack of clarity while using this document, or if you have any
criticisms or suggestions, please contact your local POC at the nearest branch
office. Addresses for Siemens RCs are available at
1.2.4

Use of documents/ Request to the reader

Before using our products, it is important that you read the documents supplied
with or ordered at the same time as the products (equipment, applications, tools
etc.) carefully and in full.
We assume that persons using our products and documents are authorized and
trained appropriately and have the technical knowledge required to use our
products as intended.
Wall-mounted sensors and room operator units for KNX S-Mode and KNX LTE-Mode CM2N1602en_01
About this document
Section
Legal owner
KNX Association, B - 1831 Brussels-Diegem Belgium
http://www.knx.org/
Pages
www.siemens.com/sbt
2013-07-04