6.4.12 Operation Of Light, Shading And Scenes - Siemens QMX3.P37 Technical Principles

Individual buttons
1-button switching/sending value
Edge
Short button
pressure
Long button
pressure
1-button dimming
Action short/long button pressure [at/dim, On/brighter,
Off/darker]
Long button pressure [0.5 - 6.0s] dimming value 0% or 100%
1-button solar protection / blinds control
Action short/long button pressure [stop/up/up,
stop/close/down]
Long button pressure [0.5 - 6.0s] move to end positions
Scene Scene number [1...64]
Release scene memory [Yes/Non]
(long button pressure [1 - 6s])
Combined / Button pairs
2-button switching
Action button pair [left Off, right On, right Off/left On]
2-button dimming
Action button pair [left On/brighter, right Off/darker]
Long button pressure [0.5 - 6.0s] dimming value 0% or 100%
2-button solar protection / blinds control
Action button pair [left: step up/drive up, right: close/down]
Long button pressure [0.5 - 6.0s] move to end positions
Siemens
Building Technologies

6.4.12 Operation of light, shading and scenes

Possible function assignment for buttons / button pairs
(8 individual buttons or 4 pairs of buttons).
Only QMX3.P02 and QMX3.P37
Action rising edge [---, Off, On, At, Send
percentage value, Send 8-Bit value]
(Action falling edge [---, Off, On, At, Send
percentage value, Send 8-Bit value])
Action short button pressure [---, Off, On, At,
Send percentage value, Send 8-Bit value]
Long button pressure via send 2nd object [No,
Yes]
Action long button pressure[---, Off, On, At,
Send percentage value, Send 8-Bit value]
Wall-mounted sensors and room operator units for KNX S-Mode and KNX LTE-Mode CM2N1602en_01
GAMMA building management system
LED response and parameterization
LED display [object-independent, status
object]
(Object independent) LED constant
value [off, on (orientation light)]
( Status object) LED activation [Off/On,
On/Off]
LED display [object-independent,
status object]
(Object independent) LED constant
value [Off, On (orientation light)]
( status object) LED activation [Off/On,
On/Off]
No LED display
Selection of predefined scene (short
button pressure <0.5 s). LED On for 3 s
Memorize changed scene (long button
pressure >5 s).
LED flashes for 3 s. When off, user can
release button.
LED response and parameterization
LED display [object-independent,
status object]
(Object independent) LED constant
value [Off, On (orientation light)]
(status object) LED activation [Off/On,
On/Off]
LED A2 display [object-independent,
status object]
(Object independent) LED constant
value [Off, On (orientation light)]
(status object) LED activation [Off/On,
On/Off]
No LED display
35 / 40
2013-07-04