GE DigitalFlow GS868 Startup Manual page 47

March 2008
Taking Measurements
(cont.)
3-6
Note: Ch1 (or Ch2), which is shown in parentheses above, appears
only with a 2-Channel Model GS868.
Table 3-2: Measurement Parameter Options
Option Bar Choice
=
[F1] VEL
=
[F2] VOLUM
=
[F3] +TOTL
=
[F4] -TOTL
→]
=
[ + [F1] TIME
→]
=
[ + [F2] MDOT
→]
=
[ + [F3] +MASS
→]
=
[ + [F4] -MASS
→] →]
=
[ + [ + [F1]
DIAG
The option listed in Table 3-2 above provides access to a wide
variety of diagnostics parameters. See Chapter 3, Diagnostics, of the
Service Manual for a complete description of these options.
By following the instructions in this section, the Model GS868 can be
set up to display the desired channel option (for a 2-Channel meter)
and the desired measurement parameter. To utilize the more advanced
display capabilities of the Model GS868, refer to the Programming
Manual and/or the Service Manual for the instrument.
Description
Flow Velocity
Volumetric Flow
Forward Totalized Volume Flow
Reverse Totalized Volume Flow
Total Flow Measurement Time
Mass Flow
Forward Totalized Mass Flow
Reverse Totalized Mass Flow
Diagnostic
DIAG
Operation