Connect Power Cord - Gree NCHS1B(U) Owner's Manual

Commercial air conditioners; gmv5 hr heat recovery cooling and heating mode

Hide thumbs Also See for NCHS1B(U):

Table of Contents

GMV5 HR Heat Recovery Cooling and Heating Mode Exchanger

5.2 Connect Power Cord

NOTICE ！ The mode exchanger in the same system must be supplied power uniformly.

Remark: The maximum quantity "n" of indoor unit is decided by the capacity of indoor unit, please

refer to capacity of unit.

(1) Use single-phase power air conditioner

1) Remove electric box cover of indoor unit.

2) Pass the power cord through rubber ring.

3) Connect power cord to "L1，L2" terminal and earthing screw. Please use the green bonding

screw to connect the earthing cord.The location is showing in the Fig 5.4

Fig. 5.3

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the NCHS1B(U) and is the answer not in the manual?

Nchs2b(u)Nchs4b(u)Nchs8b(u)