Maintenance; Periodic Maintenance Schedules; Cleaning - Mylaps X2 Manual

7.Maintenance

Maintenance can be described as, but not limited to:
•
Checking and testing components;
•
Cleaning the unit and individual components - accumulated dirt can hamper unit operations;
•
Charging the unit;
•
Troubleshooting any malfunctions that may occur on the unit during operation.

Periodic maintenance schedules

Type of maintenance
Clean
Charging
Replace parts and accessories

Cleaning

Take a clean soft cloth or brush and moisten it with clean water
•
Do not use an abrasive cleaning liquid.
•
Do not use high pressure water guns or other (dish)washing machines to clean or rinse the transponders.
•
Do not clean transponders with automotive cleaning products or other detergents.
•
Use the moist cloth or brush to clean the X2 Transponder, paying attention to remove any dirt on the connector
pins. Dry off any excess moisture.
•
Take a fresh clean cloth and moisten it with clean water.
•
Clean the X2 Transponder making sure not to get moisture on the electrical connector where the USB cable can be
connected.
•
Dry off any excess moisture.
•
If necessary, use clean cotton tips to clean any dirt off the connectors on the X2 RaceKey and the X2 Transponder.
X2 transponder version 2018
Daily 100 hours
X
X
300 hours As required
X
X
© MYLAPS rights reserved
18