Advertisement
Quick Links
Advertisement
Related Manuals for Mylaps TR2
Summary of Contents for Mylaps TR2
- Page 1 MYLAPS.COM TRANSPONDER DIRECT POWER QUICK START GUIDE...
-
Page 2: What's In The Box
Holder IMPORTANT! You need to register and activate your transponder in the Speedhive App The TR2 Transponder Direct Power is only compatible with Android and iOS devices running Bluetooth 4.0 or higher (most modern mobile phones have this) ... - Page 3 <2 ft <30 cm <1 ft TR2 Transponder Direct Power placement height on Car max. 60 cm (2ft) and on Kart max. 30 cm (1ft) Please note that for Car, the front wheel well is the preferred position for the installation of the TR2 Transponder Direct Power BIKE &...
-
Page 4: Mounting The Transponder
MOUNTING THE TRANSPONDER Make sure that the TR2 transponder holder is mounted securely using screws or rivets to metal, or nuts and bolts and washers to plastic, on both positions of the TR2 transponder holder. CAR & KART Screws, rivets or nuts &... - Page 5 (chassis). Make sure the TR2 Transponder Direct Power is connected to a switchable 12V power supply/battery, to prevent the battery from draining when the vehicle is not in use. If the TR2 Transponder Direct Power is correctly installed and there is 12V present on the wires, the LED lights up.
- Page 6 TRANSPONDER DOWNLOAD THE SPEEDHIVE APP REGISTRATION MOUNT YOUR TRANSPONDER Mount the TR2 Transponder Scan the QR Code to download Direct Power to your vehicle the Speedhive App LOGIN / SIGN UP IN THE SPEEDHIVE APP TURN ON BLUETOOTH ...
- Page 7 SELECT TRANSPONDER TYPE SELECT DETECTED TRANSPONDER Make sure that the ignition of your vehicle is turned on START TRANSPONDER REGISTRATION TURN YOUR IGNITION OFF Turn the ignition (engine) of your vehicle off , this will put your transponder in Bluetooth mode...
- Page 8 REGISTER TRANSPONDER YOUR TRANSPONDER IS REGISTERED CHECK YOUR SUBSCRIPTION TRANSPONDER DETAILS Under the ‘My Products’ section, tap on your TR2 Transponder Direct Power for Transponder details...
- Page 9 The X2 Driver ID 2.0 unit is an optional add-on product The TR2 Transponder Direct Power (Kart & MX) is not compatible with the X2 Driver ID 2.0 unit Helmet Plug / Rotary Switch A Driver ID helmet plug or rotary switch can be connected to the White and Blue (ground) wires on the supplied cable.
-
Page 10: Product Operation
(disconnection of battery while charging), relay contacts, solenoids, alternator, fuel injectors etc. The internal protection circuitry of the device is not capable of handling high energy voltage events directly from such sources. MYLAPS EMEA Office MYLAPS Americas Office MYLAPS Japan Office Haarlem, The Netherlands... - Page 11 MYLAPS.COM...
Need help?
Do you have a question about the TR2 and is the answer not in the manual?
Questions and answers