T&S B-3950 Series Installation And Maintenance Instructions Manual

T&S B-3950 Series Installation And Maintenance Instructions Manual

Rotary waste drain valve, lever waste drain valve

Advertisement

Limited One Year Warranty
T&S warrants to the original purchaser (other
than for purposes of resale) that such product is
free from defects in material and workmanship for
a period of one (1) year from the date of purchase.
During this one-year warranty period, if the product
is found to be defective, T&S shall, at its options,
repair and/or replace it. To obtain warranty service,
products must be returned to...
T&S Brass and Bronze Works, Inc.
Attn: Warranty Repair Department
2 Saddleback Cove
Travelers Rest, SC 29690
Shipping, freight, insurance, and other
transportation charges of the product to T&S and
the return of repaired or replaced product to the
purchaser are the responsibility of the purchaser.
Repair and/or replacement shall be made within a
reasonable time after receipt by T&S of the returned
product. This warranty does not cover Items which
have received secondary fi nishing or have been
altered or modifi ed after purchase, or for defects
caused by physical abuse to or misuse of the
product, or shipment of the products.
Any express warranty not provided herein, and
any remedy for Breach of Contract which might
arise, is hereby excluded and disclaimed. Any
implied warranties of merchantability or fi tness
for a particular purpose are limited to one year in
duration. Under no circumstances shall T&S be
liable for loss of use or any special consequential
costs, expenses or damages.
Some states do not allow limitations on how
long and implied warranty lasts or the exclusion or
limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply
to you. Specifi c rights under this warranty and other
rights vary from state to state.
P/N: 098-018118-45
Date: 04-27-11
Drawn: TEH
Checked: GEF 05-05-11
Approved: JHB 05-06-11
Installation and
Maintenance
Instructions
B-3940
& B-3950 Series
Rotary Waste Drain Valve
B-3960
& B-3970 Series
Lever Waste Drain Valve

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B-3950 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for T&S B-3950 Series

  • Page 1 Attn: Warranty Repair Department B-3940 2 Saddleback Cove Travelers Rest, SC 29690 & B-3950 Series Shipping, freight, insurance, and other transportation charges of the product to T&S and Rotary Waste Drain Valve the return of repaired or replaced product to the purchaser are the responsibility of the purchaser.
  • Page 2: Exploded View

    Exploded View B-3940 Series...
  • Page 3: Part Number Guide

    Part Number Guide B-3940 Series Rotary Waste Drain Valve Strainer, 3” Snap-in Removable 010385-45 Flange, 3” Face 015306-45 Gasket, 3” Face Flange 010381-45 Plunger, Twist Drain 010388-45 O-Ring, Plunger 010389-45 Adapter, 2” NPT x 1½” NPT Male B-3945 Adapter, 2” NPT x 1½” BSP Male B-3945-BSP Handle Asm, Rotary Waste Valve Twist 010393-45...
  • Page 4 Exploded View B-3950 Series...
  • Page 5 Part Number Guide B-3950 Series Rotary Waste Drain Valve Strainer, 3½” Snap-in Removable 010386-45 Vandal Resistant Locking Flat Strainer, 3½” 010386-45VR Flange, 3½ Face 010384-45 Gasket, 3½” Face Flange 010382-45 Plunger, Twist Drain 010388-45 O-Ring, Plunger 010389-45 Adapter, 2” NPT x 1½” NPT Male B-3945 Adapter, 2”...
  • Page 6 Exploded View B-3960 Series...
  • Page 7 Part Number Guide B-3960 Series Lever Waste Drain Valve Strainer, 3” Snap-in Removable 010385-45 Flange, 3” Face 015306-45 Gasket, 3” Face Flange 010381-45 Plunger Casting for Lever Waste Drain 015405-45 O-Ring, Plunger 010389-45 Adapter, 2” NPT x 1½” NPT Male B-3945 Adapter, 2”...
  • Page 8 Exploded View B-3970 Series...
  • Page 9 Part Number Guide B-3970 Series Lever Waste Drain Valve Strainer, 3½” Snap-in Removable 010386-45 Vandal Resistant Locking Flat Strainer, 3½” 010386-45VR Flange, 3½ Face 010384-45 Gasket, 3½” Face Flange 010382-45 Plunger Casting for Lever Waste Drain 015405-45 O-Ring, Plunger 010389-45 Adapter, 2”...
  • Page 10: General Instructions

    General Instructions Installation Figure 1 shows an explosion of the waste drain installation Snap-in Strainer Sink Bowl Sink Flange Gasket Waste Drain Assembly Figure 1 1. Remove the Snap-in Strainer and unscrew the Sink Flange from the Waste Drain Assembly. Apply a bead of Plumber’s Putty to the bottom of the Sink Flange where it contacts the sink bowl.
  • Page 11: Maintenance

    General Instructions 6. If Overfl ow* is used - Install the Overfl ow Head in the sink. Measure and cut the overfl ow tube to fi t into the Overfl ow Head and Overfl ow Port on the waste drain Outlet.
  • Page 12 RELATED T&S BRASS PRODUCT LINE B-3999-OF Waste Drain Overflow Kit 017670-45 Waste Drain Installation Tool B-39K Parts Kit for Waste Drains T&S BRASS AND BRONZE WORKS, INC. A fi rm commitment to application-engineered plumbing products 2 Saddleback Cove, P.O. Box 1088 T &...

This manual is also suitable for:

B-3970 seriesB-3940 seriesB-3960 series

Table of Contents