Edit Mode - GFI System SPECULAR TEMPUS User Manual

3. Activate the algorithm.

Tap the View / Edit button again
The algorithm is now activated.
You can save the selected algorithm as preset using the normal procedure for saving preset (see
section 2.3). The preset's title will be automatically set to the name of the algorithm.
Tips : If you want to change the title you can do so using the SpecLab software. You can also use
the SpecLab to perform deeper editing / customization of the algorithms.

2.7 Edit Mode

To enter the Edit Mode press and hold the View / Edit push button, the display will read
you can either cancel and exit by holding the button again until the display returns to normal scene
or continue editing by turning any one of the 4 knobs.
In Edit mode the 4 knobs function as switches which you can use to set the desired values for the
4 parameters listed in the table.
Kill-Dry
Preset Title
Algo Name
* EDIT MODE *
hold down 2 exit
Tempo Scope Tempo Unit
DL: TRANSPOSER
algo activated
>> TRANSPOSER
DL: TRANSPOSER
Auto Swell Source
9
10