Auto Swell; Algorithm Library - GFI System SPECULAR TEMPUS User Manual

2.5 Auto Swell


Press A and B simultaneously, and
The parameter controlled by one of the four knobs** gradually sweeps from its current value to the
maximum value (as if someone slowly turns the knob all the way up).
current value
current value
Tips : - This operation can also be done using an external switch box (see chapter 4).
** The swelled parameter can be set to any one of the four knobs :

Blend

Decay / Time

Param

Intensity / Repeats
Choosing the parameter that you would like to use as the source for auto-swell can be
done using the Edit function (see section 2.7) or using the SpecLab software.

2.6 Algorithm Library

The algorithm library contains 13 reverbs,13 delays, and 6 reverb & delay combined algoritms.
You can select any one of these algorithms, tweak it, and then save it as presets.
1. Access the algorithm library.

Tap the View / Edit button
2. Select an algorithm.

Turn the DECAY / TIME knob to
browse the Reverb algorithms.
Turn the PARAM knob to browse
the Delay algorithms.
hold.
The value will remain at maximum as long as you
hold the footswitches down.
max value
When the footswitches are finally released the pa-
rameter sweeps back to its original value.
max value
[ ALGO LIBRARY ]
^ turn knobs ^
Algorithm's name
DL: TRANSPOSER
tap the button
7
8