Beko QWIK-PURE 200 Instructions For Installation And Operation Manual page 24

Maintenance • Mantenimiento
Entretien • Manutenção

Prior to maintenance work:
• Shut off condensate inlet (if necessary
switch off compressor).
• If there is an in-built heating system,
disconnect the device from the power
supply!
General cleaning of QWIK-PURE
(recommended every 12 months)
3
1
Empty main tank
Clean main tank.
Note:
Do not add any cleaning agents (sur-
factants or flammable cleaners)! They
impair the filter efficiency.
After cleaning:
2 Insert new OEKOSORB filter set (see
page 22).
2
Insert new filter mat.
3
Fill QWIK-PURE unit with clean water
(see page 18).
2
After maintenance work
• Open condensate inlet.
• If there is an in-built heating system,
reconnect the power supply.
1
english
QWIK-PURE 200, 350