Panel Controls And Indicators - Cooper MENVIER MF200 Manual

PANEL CONTROLS AND INDICATORS

Visual
SUPERVISOR MODE
Audible
Piezo buzzer integral within panel, common to fire and fault.
Keys
The controls of the panel are via a 5 key keyboard on the front of the panel.
A key press is acknowledged by a vlip of the internal panel buzzer and in the normal mode the
Supervisor Mode LED will flash.
Keys labelled 1, 2 and 3 have more than one function these are described below.
KEY Normal Operation
Primary function
1 Code Entry
2 Code Entry
3 Code Entry
4 NONE
POWER FAULT POWER FAULT
SYSTEM FAULT SYSTEM FAULT
EARTH FAULT EARTH FAULT
ALARMS ALARMS
1 1
SUPERVISOR SILENCE/SOUND
................... ...................
DISABLE
SELECT
TEST
1 1 2 2
Supervisor Mode
Secondary function
Toggle for Supervisor Mode
Disable Mode and Test Mode
Silence/Re-Sound Alarms
Lamp Test/Exit
RESET
SUPERVISOR SUPERVISOR
MODE MODE
DISABLE MODE DISABLE MODE
TEST MODE TEST MODE
REMOTE SIGNAL REMOTE SIGNAL
DISABLE DISABLE
2 2 3 3
LAMP TEST/EXIT
...................
3 3
PAGE 3
DESIGNED TO EN54 PART 2&4 1997 DESIGNED TO EN54 PART 2&4 1997
POWER POWER
FIRE FIRE
FAULT FAULT
FAULT DISABLE/TEST
RESET SILENCE BUZZER
4 4 5 5
Note Zones 3 & 4
are not provided
Tertiary function
Toggle for Supervisor Mode
Disable Mode and Test Mode
Select Function-Disable or Test
(Toggle through Functions)
Disable or Test
RESET
on MF200