Safety Instructions For Use Of The Biom 4 - OCULUS BIOM 4 Instruction Manual

Attention
Heed unconditionally the instruction manual and safety advice of the operating micro-
scope and of the additional equipment. Familiarize yourself with all safety features and
devices before you put the unit into initial operation.
2.3

Safety instructions for use of the BIOM 4

Note
Before putting this instrument into operation for the first time, the user must be famil-
iarized with it by an Oculus Optikgeräte GmbH representative or an authorized dealer.
Attention
No modifications may be made to this device without the permission of the manufactur-
er.

Only operate the device using original accessory parts supplied by us, and when the
device is in technically correct working order.

Do not use the unit if it is damaged; in this case, get in touch with your supplier.

Observe the legal regulations with regard to accident prevention.

Also comply with the legal provisions in force in your country, and with the hygiene
and waste disposal regulations of the hospital or clinic.

If a fault occurs that you cannot rectify with the help of the troubleshooting table
(sect. 8, page 22), the unit must not be used. Clearly mark the unit as non-operation-
al and get in touch with our service personnel.

The BIOM and all sterilizable BIOM components must be sterilely condi-
tioned prior to the first, and every subsequent use.

It is imperative that you heed the cleaning, disinfection and sterilization instructions
given in the "conditioning manual".
Instruction manual BIOM 4 (G/54400/1011/en)
2 Safety Instructions
3 / 34