Installing The Grass Catcher - Simplicity Clean Sweep Twin Catcher Operator's Manual

Installing the Grass Carcher
1. Set the back plate & support (A, Figure 11) on pins of
hitch plate (C). Secure with rod (D) and hair pin (B).
2. Install the bags (C, Figure 12).
3. Install the cover (E, Figure 12). Secure with the cle-
vis pins (F) and hair pin clips (B).
NOTE: Push the hair pin clips all the way on or they will
be bent by the hinge when the cover is opened.
4. Connect the cover cable (Figure 8).
5. Insert the tubes (A, Figure 12) into the catcher and
connect to the turbo. Be sure the clip (F) is secured
over the top of the turbo flange nut.
A. Tubes
B. Hair Pin Clip
C. Bags
D. Clevis Pin
E. Cover
F. Clip
Figure 12. Normal Removal & Installation
Removing and Reattaching Grass Catcher
A
F
15
A
B
Figure 11. Install Back Plate
A. Back Plate & Support
B. Hair Pin
B
C
D
C. Hitch Plate
D. Rod
E
D
C