Installing Generic (Text-Only) Irda Printer - Intermec 6110 Technical Reference

Windows 95 Support

Installing Generic (Text-only) IrDA Printer

If you want to install a generic printer (without a printer-specific driver), with
the Lite and Minimal configurations, this requires a slightly different
installation than the printers described above.
You need two PC Cards, both installed from the toolkit CD-ROM:
"
"
Insert both cards into PC Card slots on your 6110 Computer, and wait for it to
boot to the desktop. It is also recommended that you use an external keyboard
for this operation, at least for the serial number for Windows 95.
1. If you have not done so at a previously time, enter serial numbers and
2. Double-tap My Computer with your stylus, then on Printers, followed by
3. Select Generic from the Manufactures list, and select Generic / Text
4. Select InfraRed Printing Port (LPT) from the Available Ports list,
5. Alter the Printer name field as desired, then tap Next.
6. Point the IR port (located at the end of the unit nearest the keypad) at the
7. When prompted with, "Would you like to print a test page?" tap Yes. Then
3-10 6110 Hand-Held Computer Technical Reference
a 6110 boot card (containing a Win95 configuration)
a Cabinet Files card
calibrate the pen.
Add Printer.
Only from the Printers list, then tap Next.
then tap Next.
printer you are installing. Make sure the printer is turned on and its
battery is fully charged. (Most printers emit a noise when they sense an
InfraRed transmitter nearby.
when asked if the IR connection is established tap Finish.
SECTION 3