Download Print this page

Morphy Richards Power Steam Manual page 9

Steam generator with intelli temp
Hide thumbs Also See for Power Steam:

Advertisement

RN333000 MUK Rev2.qxp_IB 11/11/2015 10:08 Page 9
IN HARD WATER AREAS, WE RECOMMEND
A MIX OF 50% TAP WATER AND 50%
DISTILLED OR DEMINERALISED WATER.
Never use battery topping up fluid or water
containing any substances like starch, sugar,
fragrant additives or defrosted water from a
refrigerator.
Re-filling during use
If the water level is too low, the unit will not
produce steam. If this happens, disconnect the
water tank
(11)
and refill with water.
Dry ironing
To use your steam generator as a dry iron only,
follow steps 2, 3, 4 and 5 of 'Using the Steam
Generator for steam ironing' on page 7 and 8.
You do not need to put water in the water tank
(11).
Auto shut-off
If the iron
(7)
is not moved or the steam trigger
goes unused for 10 minutes, the product will
automatically turn off for safety and to save
energy. When this happens, the auto shut-off
indicator
(25)
will flash.
To restart, either move the iron or press the
steam trigger
(6)
Generator for steam ironing' on page 7) and wait
for the temperature to rise again.
(see step 6 of 'Using the Steam
Steam function
During steaming, small amounts of water may be
ejected from the soleplate (8). This is normal and
can be avoided by using the steam for short
amounts of time and only when the iron is at the
correct temperature (the temperature setting
indicator
(23)
on the control panel stops flashing
when ready).
Sudden jolts to the boiler unit can also cause
water droplets on the soleplate; therefore, do not
move the base unit
We recommend for first time ironing that you
iron over an old towel.
NOTE: The product may occasionally produce a
pumping sound during steam ironing. This is
normal and is caused by water being pumped
through the steam generator. If the pumping
sound suddenly becomes louder or the steam
diminishes, check and refill the water tank if it
has become empty.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, upholstery, etc.
Hold the iron
(7)
between 1cm and 2cm away
from the item and press the steam trigger (6).
(6)
WARNING: Do not use the vertical steam
feature on clothes that are being worn.
NOTE: The appliance is not turned off completely
in auto shut-off mode. To switch the product off,
press and hold the function button
indicators in the control panel
unplug the product from the mains outlet.
(18)
during ironing.
6
(2)
until all
(1)
extinguish, then
9

Hide quick links:

Advertisement

loading
Need help?

Need help?

Do you have a question about the Power Steam and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel