Morphy Richards Power Steam Manual page 11

RN333000 MUK Rev2.qxp_IB 11/11/2015 10:08 Page 11
Turn off the product (see step 7 of 'Using the
7
Steam Generator for steam ironing' on page 8).
To clean a coated soleplate
Do not use scouring powder or solution as this
could cause damage to the coating.
If any man-made fibres fuse to the soleplate (8),
set the iron at the MAX setting and pass it over a
clean piece of cotton to draw the deposit off the
surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp
cloth and mild detergent, then wipe dry.
Allow the appliance to cool.
Remove the detachable water tank (11). Lift the
filler cap (10), and empty the water tank. Once
the water tank is empty, re-attach it to the base
unit (18).
Storing the steam iron
Lock the iron (7)
of the base unit (18)
Ensure the iron-to base lock
1
unlocked position (flat side facing upwards).
Push the iron heel
2
(15) and rest the soleplate
plate (13).
into the storage position on top
as follows:
(12) is in the
(9) into the rear docking hook
(8) on the iron rest
Ensure the tip of the soleplate is pointing to the
3
arrow on the flat side of the iron-to-base lock. Then
rotate the iron-to-base lock through 180º around
the tip of the soleplate, securing the iron in place.
Straighten any kinks in the steam supply cord
4
and the power cord (16). Next, loosely loop the
cords together in a figure 8 formation and pass
them through the iron handle (3). Ensure there is
slack on the cables at the base unit end, and on the
steam supply cord at the cable pivot on the iron.
cable pivot
WARNING: Do not wrap the cables too tightly
as this can stress and damage the wires inside.
Damage to the cables caused by wrapping too
tightly will not be covered by the guarantee.
Contact us
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from. Please have the product name, model
number and serial number to hand when you call
to help us deal with your enquiry quicker.
UK Helpline: 0344 871 0944
IRE Helpline: 1800 409 119
Spares: 0344 873 0710
Talk To Us
If you have any questions or comments, or want
some great tips to help you get the most out of
your products, join us online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
Twitter: @loveyourmorphy
Website: www.morphyrichards.com
(5)
11