Morphy Richards Power Steam Manual page 8

RN333000 MUK Rev2.qxp_IB 11/11/2015 10:08 Page 8
Using the Steam Generator for steam ironing (continued)
Unlock the iron (7)
of the base unit (18)
lock (12) - this enables you to lift the iron heel
away from the iron rear docking hook (15).
During use, the iron may be rested on the iron rest
plate (13) with the iron-to-base lock rotated so the
flat side is upper-most (in the unlocked position).
When you have finished ironing, turn off the
appliance by pressing and holding the function
button (2) for two seconds. A beep will be heard
and all indicators on the control panel
extinguished.
Disconnect the plug from the mains outlet.
8
from its storage position on top
by rotating the iron-to-base
(1) will be
5
6
The steam function is ideal for relaxing the fibres
of tougher fabrics (like jeans and linen) and
(9) getting rid of those stubborn, hard to reach
creases.
To produce powerful steam during ironing,
simply press and hold the steam trigger (6).
Unless you are using the IntelliTemp setting, the
appropriate steam level indicator will flash whilst
the steam trigger is pressed, indicating that
steam is being produced.
NOTE: steam cannot be produced on the 1-Dot
setting - this is highlighted by the no steam
indicator (22) being visible on the control panel
(1) whilst the 1-Dot setting is selected.
7
6