Morphy Richards Power Steam Manual page 7

RN333000 MUK Rev2.qxp_IB 11/11/2015 10:08 Page 7
Using the Steam Generator for steam ironing
When steam ironing, remove the detachable
water tank (11) using the water tank removal
tabs (17), lift the filling cap (10), and fill with
water to the max fill line. Replace the water tank.
If a different temperature than IntelliTemp setting
is required to suit the garment (see 'Temperature
guide' on page 6), you may adjust the
temperature as follows: press the function
button (2) repeatedly until the required
temperature setting indicator
Pressing the function button cycles the options
as shown in the next step.
1
Plug the appliance into a mains outlet. Press the
function button
beep will be heard and the IntelliTemp logo
will illuminate on the control panel (1). The
Intellitemp setting indicator
panel will flash until the default temperature is
reached. The default temperature is the
IntelliTemp setting, this allows the appliance to
iron all ironable fabrics without the temperature
needing to be adjusted. However, do not iron
any fabric with this symbol
setting indicator will stop flashing and remain
constant when the IntelliTemp setting is reached.
3
The appropriate temperature setting indicator
(23)
reached. Begin ironing when the temperature
indicator illuminates constantly. If you turn the
temperature down, wait until the temperature
(23) is displayed. indicator stops flashing before continuing
ironing.
The steam level is automatically adjusted to suit
the selected temperature setting. This is
denoted by the steam level indicators
on the control panel (1), which will change along
with the temperature level indicators when you
select your desired temperature level.
(2) to switch the product on. A
(24)
IntelliT T emp emp
Dot 1 Dot 2
setting
will flash until the desired temperature is
2
(26)
on the control
. The Intellitemp
4
Dot 3 Max
(19/20/21)
7