Table of Contents
Advertisement
MAINTENANCE
CAUTION
!
!
CAUTION
!
CAUTION
Remove the #6 Screw using a Phillips head Screwdriver.
Pull the halogen bulb from its socket and replace bulb using a clean dry cloth.
The halogen bulbs are available from local hardware and retail stores. Use 25W
120V halogen bulbs.
13592 Desmond St., Pacoima, CA 91331 - 818.897.0808 - 888.753.9898
Before doing any maintenance, disconnect power to the appliance and wait until the oven is cool.
Handle the cover glass and halogen bulb carefully to avoid breaking. Broken glass may cause injury.
Any maintenance on appliances with French doors must be performed by a qualified service technician. Improper handling and
replacement of the doors may result in improper oven operation, door breakage and personal injury.
Always wait until the oven has cooled down before any cleaning and maintenance. Care must be taken when removing the Chef
door as it is heavy and constructed with stainless steel front, glass and door liner with porcelain enamel finish.
Grasp along the sides [TOP-LEFT & TOP-RIGHT] of the oven door when lifting. DO NOT lift using the door handle as the
door may swing in your hand and cause injury.
Place the oven door on a flat surface away from a busy area. Use a clean rug or board to protect the door parts.
STEP 1
STEP 3
Remove the holding clips and glass cover to expose the halogen bulb.
Replace the holding clips back into the light receptacle and insert cover glass
until seated properly. Replace the screw and connect power back to the
appliance.
-
www.americanrange.com
REPLACING THE
OVEN LIGHT BULB
STEP 2
STEP 4
Hide quick links:
Advertisement
Table of Contents
