Datamax IClass Installation And Operating Instructions Manual page 7

Database / Menu
Database and Menu Selection will be constructed to support the following system level data.
The following resides on the operator's front panel menu under "PRINTER OPTIONS" → "RFID".
Upon selection the display will show "NOT INSTALLED" if the device is not equipped or not
communicating and then proceed to the Mode selection.
RFID
MODE
POSITION
HF SETTINGS
AFI VALUE
AFI LOCK
DFSID VALUE
DFSID LOCK
EAS VALUE
UHF SETTINGS
LOCK CODE
LOCK AFTER WRITE
ERASE ON FAULT
RETRY ATTEMPTS
AUTO DETECT TAG
AFI - Application Family Identifier
DFSID - Data Storage Format Identifier
EAS - Electronic Article Surveillance
The following resides on the operator's front panel menu under "COMMUNICATIONS" → "HOST
SETTINGS" → "OPTION FEEDBACK".
OPTION FEEDBACK
DISABLE, UHF (915mhz), HF(13.56mhz)
0.00 - 4.00.
Currently if value is 0.00 print
position is used to encode tag. If > 0.00
presented position is used.(Subject to
change.)
2 Char Hex Value (Industry Codes)
ENABLE or DISABLE
2 Char Hex Value (Industry Codes)
ENABLE or DISABLE
2 Char Hex Value (Mfg. Codes)
2 Char Hex Value
ENABLE or DISABLE
ENABLE or DISABLE
0 -> 9
Moves label to find tag.
DISABLE, RFID, ASCII, HEX, SCANNER