Installing The Option - Datamax IClass Installation And Operating Instructions Manual
Hf and uhf rfid modules
Hide thumbs
Also See for IClass:
- Operator's manual (134 pages) ,
- Maintenance manual (88 pages) ,
- User manual (15 pages)
Advertisement
Installing the Option
Follow the steps below if installing the RFID module. If the RFID module is already installed proceed to
the next section.
1. Turn off the power switch and unplug the
printer.
2. Open the cover and remove the three Screws
that secure the Front Cover Panel to the
printer.
3. Position the RFID Front Cover Panel on the
printer and re-install two of the previously
removed screws, as shown.
Front Cover
Panel
RFID Front
Cover Panel
Screws
Screws
Advertisement
