Components; Install A Fan Module; Replace A Fan Module - Dell S60 System Manual

Table of Contents

Advertisement

Components

• S60 Fan module
• S60 Fan module - Reverse flow
• S60 Fan filter
The fan filters are used on the reverse flow (R) fan modules only.
Figure 5-1. The S60 Fan Module
Module slot 0 is on the left side of the system; module slot 1 is on the right side of the system.

Install a Fan Module

The fan modules in the S60 are field replaceable. The PSUs are in a single piece with the fans. For the
procedure to replace the entire PSU, refer to
To install a fan module, follow these steps:
Step
Task
Take the fan module out of the shipping box.
1
Use the grab handle to slide the fan module into the bay.
2
Tighten the securing screw at the top of the fan module.
3

Replace a Fan Module

Dell Networking recommends replacing the fan tray within five minutes. If the fan tray is left out for too
long, the system may experience traffic disruption.
PSU0
Grab Handle
Chapter 4, Power
Securing Screw
Fans and Filters
Fan Module1
Supplies.
Fans and Filters
|
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Force10 s60 series

Table of Contents