Table of Contents
Advertisement
Figure 3-1. S60 Stacking Topology with 2-port, 12G Stacking Modules
Switch 1
Switch 2
Switch 3
Figure 3-2. S60 Stacking Topology with 1-port, 24G Stacking Modules
Switch 1
Switch 2
48
Switch 3
While the diagram shows A-to-B connections, the ports are bi-directional so you can connect A-to-A or
B-to-B, as shown in the examples of two-switch ring topologies
or
Figure
3-6) ring topologies.
Before you make your stacking port connections, rack-mount the stacking systems or insert them into a
cabinet. Insert one end of the stacking cable into a stacking port and insert the other end into a stacking
port of the adjacent switch. To ensure the cable is secure in the connector, hand-tighten all the captive
screws.
Ring Topology
(with 2-port 12G modules)
48
49
48
49
48
49
Ring Topology
(with 1-port 24G modules)
48
48
50
Cascade Topology
(with 2-port 12G modules)
48 49
Switch 1
48 49
Switch 2
48 49
Switch 3
Cascade Topology
(with 1-port 24G modules)
50
Switch 1
50
Switch 2
48
Switch 3
(Figure 3-4
48
50
48
50
) and three-switch
(Figure 3-5
Install the S60 System
50
|
16
Advertisement
Table of Contents
