Intended Use; Content; Operation - Danfoss DGS Series User Manual

User Guide | Danfoss Gas sensor. Type DGS. Modbus or Service Tool display operation
1

Intended use

2

Content

3

Operation

4 | RS8KD102
The display of the handheld Service Tool and the
Modbus interface for integration with Building
Management Systems is used as interface for
operation, commissioning and calibration of the
DGS gas detection unit
This user guide contains the maximum possible
functionality of concerned display devices.
Depending on the DGS type some features
described here are not possible and therefore the
menu items may be hidden.
Some features are available from Modbus or
handheld Service Tool interface only. Differences
is highlighted in this document.
The configuration and service is made via the
handheld Service Tool or in combination with the
Modbus interface.
Security is provided via password protection
against unauthorized intervention.
Handheld Service Tool:
Operation is done via 6 buttons.
D1 CO2 ppm
Warm-up Time
←─
Esc
Gas Detection Service Tool DGS Service Tool
AK-SM 800 Front End:
The configuration is done via the graphical
display and buttons or via the PC tools
StoreView Desktop or AK-ST 500.
© Danfoss | DCS (ADAP-KOOL®) | 2018.12