Download  Print this page

Adjusting The Monitor; Turning On The Monitor - HP ProDisplay P19A User Manual

Led backlit monitor.
Hide thumbs


Adjusting the Monitor

Tilt the monitor panel forward or backward to set it to a comfortable eye level.
Figure 2-5

Turning on the Monitor

Press the power button on the computer to turn on the computer.
Press the power button on the front of the monitor to turn on the monitor.
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you
should always activate a screen saver application or turn off the monitor when it is not in use for a
prolonged period of time. Image retention is a condition that may occur on all LED screens. Monitors
with a "burned-in image" are not covered under the HP warranty.
* A prolonged period of time is 12 consecutive hours of non-use.
If pressing the power button has no effect, the power button lockout feature may be enabled.
To disable this feature, press and hold the monitor power button for 10 seconds.
You can disable the power LED in the OSD menu. Press the
monitor, then select Management > Bezel Power LED > Off.
Chapter 2 Setting Up the Monitor
Tilting the Monitor
Burn-in image damage may occur on monitors that display the same static image on
button on the front of the


Table of Contents

   Related Manuals for HP ProDisplay P19A

Comments to this Manuals

Symbols: 0
Latest comments: