Napoleon Luxuria series Installation Manual page 54

finish framing - after appliance installation
EN
see-thru flush
Drywall
minimum framing
Ref
K 39 15/16" (101.4cm)
E**
F 53 13/16" (136.7cm)
J
L
Q*
(Q x R)*
* ONLY APPLICABLE TO OPTION 2 AND 3 - Opening must be centered in enclosure on appliance. Dimensions represent
finished sizes and where applicable should be adjusted to include finish material thickness.
**Max. 21" (53.5cm).
54
W415-1710 / B / 08.17.18
Ceiling
R
Q
K
E
F
Insulation
LVX38
39 15/16" (101.4cm)
16 3/16" (41.1cm) 16 3/16" (41.1cm)
65 13/16" (167.2cm)
Optional - Appliance does not need to be elevated above floor
73" (185.4cm)
80 sq. in.
L
J
LVX50
39 15/16" (101.4cm)
16 3/16" (41.1cm)
77 13/16" (197.6cm)
73" (185.4cm) 91" (231.1cm)
2" min and 3" max
note:
Finish framing must be built after
appliance has been placed in its
final position and venting
connected.
The LVX series requires a mini-
mum enclosure height, as illus-
trated (dimension L), measured
from the bottom of the appliance.
For temperature requirements,
this area must be left unobstruct-
ed. Some venting configurations
that require more vertical rise
will require a larger enclosure to
provide minimum vertical clear-
ance between vent pipes and
combustibles.
Option 2 illustrated (appliance not
shown)
LVX62 LVX74
39 15/16" (101.4cm)
16 3/16" (41.1cm)
89 13/16" (228.1cm)
91" (231.1cm)
160 sq. in.