Canon BW Expansion Bus-C1 Service Manual page 17

4) Insert the Expansion BUS-C1 into the connector on the main controller PCB and fix it using 2 screws [2].
5) Attach the main controller box cover using 4 screws.
6) Attach the upper rear cover using 6 screws.
7) Plug the reader communication cable into the outlet of the host machine.
8) Run the reader communication cable through the cable clamp and then clamp the cable.
[2]
[1]
F-1-5
[1] [2]
F-1-6
Chapter 1
1-5