Canon Puncher Unit-L1 Installation Procedure page 15

Chapter 1
[1]
[3]
[2]
F-1-6
Turning Off the Main Power
When turning off the main power, be sure to go through the following steps to avoid damage to the machine's hard
disk:
1. Hold down on the control panel power switch for 3 sec or more.
2. Operate on the touch panel as instructed on the screen for shut-down sequence so that the
machine's main power switch may be turned off.
3. Turn off the main power switch.
4. Disconnect the power cable (for the power outlet).
7