Canon iR1210 Service Bulletin page 2

Servicing Work:
After upgrading the firmware version, perform the following steps to execute all clear and re-register the data
that has been registered.
1. Print out the registered data (system data list, 1-touch/speed/group data list, user data list, activity report,
system dump list), and save them.
2. Perform the following steps on the control panel to execute all clear.
Additional Functions Key > # Key > Left Arrow/-Key > Left Arrow/-Key > Left Arrow/-Key > Left Arrow/-
Key (CLEAR is displayed) > Set Key or OK Key > Left Arrow/-Key (ALL is displayed) > Set Key
3. Perform the following steps to re-register the data that was printed out and saved in step 1.
3-1. Re-register the 1-touch/speed/group dial list and the user data list.
3-2. Re-register the system data list and the system dump list.
Service Parts:
Old
New
Description Partumber
DIMM ASS'Y FG6-9581-000
DIMM ASS'Y FG6-9581-030
Qty I.C.
1->0 N
0->1 Y
iR1200S-014
P.C.
950
(2/2)