What To Do If; Technical Data - Electrolux EOG1000 User Manual

11. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The appliance does not
operate.
The appliance does not
operate.
The oven lamp does not
operate.
Steam and condensation
collect on the food and in
the oven.
The flame is blown out
immediately after ignition.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. TECHNICAL DATA

Total rating
Electric:
Gas:
Problem
50 W
G20 (2H) 20
mbar = 2.7 kW
G30/G31 (3 B/P)
30/30 mbar = 2.5
kW
Possible cause
The appliance is not acti-
vated.
The fuse in the fuse box
is released.
The oven lamp is defec-
tive.
You left the dish in the
oven for too long.
The thermocouple is not
sufficiently heated.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
Electric supply:
Category:
Gas Supply:
Appliance class
Remedy
Activate the appliance.
Refer to the chapter "Dai-
ly Use".
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
Replace the oven lamp.
Do not keep the dishes in
the oven for longer than
15 - 20 minutes after the
cooking ends.
After lighting the flame,
keep the knob pushed for
approximately 15 sec-
onds.
.........................................
.........................................
.........................................
230 V ~ 50 Hz
II2H3B/P
G20 (2H) 20
mbar
3
ENGLISH 15