Restore System Configurations By Ftp; Figure 54 Restore System Configurations By Ftp - Asus GigaX1024i+ User Manual

6.3.4 Restore system configurations by FTP

Make sure your PC and the switch
are in the same VLAN before you
use ftp function as well as the
other remote management tools.
The switch VLAN is shown in the
System-->IP setup page of the
WEB GUI or use "net interface
show" to display the VID by CLI.
1. Open the command prompt
window.
2. Change to the directory where
the system configuration file is located.
3. Use the command "ftp <IP Address>" to connect to the switch IP
address as the FTP server IP, ex: "ftp 192.192.1.100".
4. Type the system's user name.
5. Type the system's password.
6. Use the command "put <File Name>" to restore the system
configurations. The file must be the backup file from the same switch
model, ex: "put backup".
Chapter 6 - Troubleshooting
Figure 54. Restore system
ASUS GigaX 1024i+
configurations by FTP
53