Figure 40 Secure Mac Addresses - Asus GigaX1024i+ User Manual

Chapter 4 - Configuration Management
• Administrative bridge port is disabled.
• The port is a trunk port.
• The port is a monitor port in port mirroring.
• The port is running 802.1x and in the single-host mode.
If the status of a port is 'Shutdown', users can select the corresponding
port number and set Restart to 'Yes', then click on <Modify>. The field
you changed will update the content of the display window. Click <OK>
to save the settings. Click <Reload> to refresh the settings. To save the
configuration permanently, go to the Save Configuration page, then click
<Save>.
4.5.4.3 Secure MAC Addresses
Users can add a MAC address into
the secure MAC address table of
one port. The MAC address added
in this way will not age out from the
secure MAC address table. We call
it static secure MAC address.
• MAC Address: Enter the MAC
address.
• Port Selection: Select the port to
which the MAC belongs.
Click <Add> after you have created a new static MAC address. The new
entry will be shown in the address window.
Users can select one port from Port Selection, and then click <Query>.
You will see the current total secure MAC addresses of the port shown in
the address window.
Users can remove an existing address by selecting the entry from the list,
then clicking <Remove>. When you want to select multi-entries, please
press 'Shift' key on the keyboard and selecting the entries with the mouse.
Click <Add> or <Remove> to make the configuration take effect
immediately. To save the static secure MAC address permanently, go to
the Save Configuration page, then click on <Save>.
38
Figure 40. Secure MAC addresses
ASUS GigaX 1024i+