Advertisement
obtain an IP address automatically. Enter information provided by your ISP to
configure the WAN IP settings.
Some DSL-based ISPs use IPoA (IP over ATM) to establish Internet connections, in
this type, ISP will give you a permanent, fixed (static) IP address. Some ISP need
special requirement, such as gateway, please require from ISP and fill in the router.
If you are using your Gateway as a bridge, which makes the Gateway act like a
stand-alone modem, select "Bridging"
The installation technician from your ISP should have left the setup information for the modem
with you after installing your broadband connection. If not, you can call your ISP to request that
data.
STEP3: Configuring the router
1. Enter into router's Web-based configuration page
a)
Open browser and type router's IP address:
b)
Input username and password, both of them:
c)
By default, the Quick Setup page pops up. The Quick Setup Wizard automatically
detects your ADSL connection type. Please wait a minute.
d)
If ADSL connection is detected, the page shows your ISP connection type. Then click
information that need, the following is PPPOE example, for your reference. For the
other circumstances (PPPOA, MER, IPOA, Bridging), please refer to manual for
details.
e)
Input your username and password then click Next.
http://192.168.1.1
(the default address)
admin
(the default value)
Rev1.0
Advertisement
