Brewing; Custom Brews - Ninja Hot & Cold Brewed System CP307 Owner's Manual

PREPARING & USING
THE NINJA HOT & COLD BREWED SYSTEM™ – CONT.
Fig. 14a
Fig. 14b Fig. 15a

BREWING

NOTE: Some brews have a
pre-infusion cycle with varying times.
The brewing cycle will begin, then
there will be a pause for a short
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
period before resuming. This process
is used to evenly saturate the coffee
grounds or tea.

CUSTOM BREWS

CLASSIC BREW & RICH BREW
NOTE: Rich Brew will use slightly less
water and yield slightly less brewed
coffee or tea than Classic Brew.
1 After filling the water reservoir, place
either the COFFEE or TEA filter holder
into the brew basket. Add the ground
coffee, loose leaf tea, or tea bags
to the filter.
2 Close the brew basket, ensuring it is
securely in place. The control panel will
display either COFFEE (Fig. 14a) or TEA
(Fig. 14b) settings based on the filter
holder that has been inserted.
3 Use the Multi-Serve dial to select the brew
size. Place the empty vessel you would like
to brew into under the brew basket.
NOTE: If the brew basket is closed with
no filter holder in place, both COFFEE
and TEA will flash.
14 1-877-646-5288
Fig. 15b
NOTE: If making a single cup, lower
the Single-Serve Cup Platform and set
your vessel in the center of it. Please
ensure you are using at least a 12 oz.
cup for the Cup size, 14 oz. cup for the
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
XL Cup size, 16 oz. travel mug for the
Travel Mug size, and 20 oz. travel mug
for the XL Multi-Serve size.
4 Turn the START/SELECT dial to choose
either Classic Brew or Rich Brew (Fig.
15a, Fig. 15b). If brewing tea, press the
Tea button to toggle to the tea menu,
and use the dial to choose your tea type.
To change your brew style while in the
tea menu, press the Tea button again.
5 Press the START/SELECT dial to start the
brew. A progress bar on the control panel
will show the status of the brewing cycle.
To cancel the brew at any time, press the
dial again or press the Power button.
6 The unit will beep and the clock will
display End when the brew
is complete.
Fig. 16a
OVER ICE BREW & COLD BREW
NOTE: Cold Brew takes about
15 minutes for a Full Carafe.
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
NOTE: Glassware may be used with
the Cold Brew setting, but not the
Over Ice Brew setting.
1 After filling the water reservoir, insert
either the COFFEE or TEA filter holder
into the brew basket. Add the ground
coffee, loose leaf tea, or tea bags to
the filter.
NOTE: For COLD BREW coffee ONLY,
add an additional scoop of coffee
grounds to the brew basket.
2 Close the brew basket, ensuring it is
securely in place. The control panel will
display either COFFEE (Fig. 14a) or
TEA (Fig. 14b) settings based on the
filter holder that has been inserted.
3 Fill your desired vessel to the top with
ice cubes and place the vessel below the
brew basket. Use the Multi-Serve dial to
select the brew size.
NOTE: DO NOT add ice to the
water reservoir.
Fig. 16b
4 Turn the START/SELECT dial to choose
either Over Ice Brew or Cold Brew
(Fig. 16a, Fig. 16b). If brewing tea, press the
Tea button to toggle to the tea menu,
and use the dial to choose your tea type.
CP307 P4 BACKLIT UI LAYOUT
To change your brew style while in the tea 2017.12.21
menu, press the Tea button .
5 Press the START/SELECT dial to start the
brew. A progress bar on the control panel
will show the status of the brewing cycle. To
cancel the brew at any time, press the dial
again or press the Power button.
6 The unit will beep and the clock will display
End when the brew is complete.
ninjakitchen.com 15