Care & Maintenance; Cleaning After A Brew; Cleaning Your Water Reservoir; Cleaning Your Carafe - Ninja CP307C Owner's Manual

CARE & MAINTENANCE

CLEANING AFTER A BREW

NOTE: For best results, we
recommend rinsing the reservoir
after brewing and refilling with fresh
water for the next brew.
1 After the unit has cooled, remove the
filter holder from the brew basket. If using
a paper coffee filter, discard it. If using
either the coffee or tea permanent filter,
wash it thoroughly with soap and warm
water or place on top rack of dishwasher.
2 Clean the frother whisk after each use.
Hand-wash thoroughly or place on top
rack of dishwasher.
3 Wash the carafe and brew-through lid
with soap and warm water. Use a bottle
brush or a cloth to wash the inside of the
carafe. DO NOT use a wire brush. The
thermal carafe is NOT dishwasher safe.
NOTE: The brew-through lid, coffee
and tea permanent filters, removable
filter holders, water reservoir, flip-top
lid, frother whisk, and scoop are
top-rack dishwasher safe.
4 After the brewer has cooled, wipe down
the main unit, showerhead, and water
reservoir shelf with a cloth and warm
water. DO NOT immerse the brewer
in water.
18 1-877-646-5288

CLEANING YOUR WATER RESERVOIR

Empty the water reservoir and hand-wash or
place in your dishwasher.

CLEANING YOUR CARAFE

We recommend cleaning your carafe with
warm, soapy water.
If you want to clean the carafe more
thoroughly, we recommend using a soft
foam brush. DO NOT use a wire brush.
The thermal carafe is NOT dishwasher safe.
Fig. 22
CLEANING & DESCALING
YOUR BREWING SYSTEM
The CLEAN button will illuminate when
a cleaning cycle is recommended for your
unit, as calcium scale buildup could be
affecting the flavor of your coffee or tea.
To clean and descale your Ninja® Hot & Cold
Brew System™:
NOTE: The clean cycle takes approximately
60 minutes.
1 Select the Full Carafe size and set the
empty carafe beneath the brew basket.
2 Use a descaling solution specifically
formulated for coffeemaker cleaning
and follow the directions on the package.
Fill the water reservoir up to, but not
exceeding, the Max Fill line (1,48 L).
OR
Fill the water reservoir to the Travel Mug
line (473 ml) with white vinegar, then fill
the rest of the reservoir with water up to,
but not exceeding, the Max Fill line.
IMPORTANT: Use only white vinegar.
3 Once the water reservoir is filled with
your cleaning solution and water mixture,
press the CLEAN button (Fig. 22).
NOTE: To cancel the clean cycle, press
the Power button or CLEAN button
once. The unit will beep and stop
brewing through the cleaning mixture.
Continue to follow the instructions
starting at Step 6.
IMPORTANT: If you cancel the
clean cycle, your machine will not
be properly descaled.
4 The clock will display and count down the
remaining clean cycle time, which takes
approximately 60 minutes to complete.
Your unit will deliver a small amount of
cleaning solution to distribvute it through
the system. It will then pause, deliver
additional cleaning solution, and continue
for 60 minutes. The extended pauses allow
for maximum cleaning and descaling.
IMPORTANT: DO NOT remove the carafe
at any time throughout the clean cycle.
5 Upon completion, the brewer will beep,
the clock will display End, and the
CLEAN light will turn off.
6 Empty and thoroughly clean the carafe
and water reservoir with warm, soapy
water to remove any cleaning solution
that could affect the flavor of your
coffee or tea.
7 Fill the reservoir with fresh water up to, but
not exceeding, the Max Fill line and set the
empty carafe beneath the brew basket.
8 Flush the system by running a Full Carafe,
Classic Brew cycle with water only. After
the cycle is complete, discard the water
and thoroughly clean the carafe.
NOTE: If the CLEAN
light illuminates
again, then calcium buildup is still
present. Repeat the cleaning cycle
instructions from the beginning, and the
CLEAN light will automatically turn
off when your brewer is clean.
ninjakitchen.com 19