Table of Contents
Advertisement
Operating Instructions (brief)
Record
1.Set MIX control midway.
2.Adjust INPUT control
(optimum level = +10db).
3.Set START to 0%.
4.Set END to 100%.
5.Set PITCH to +1.
6.Press RECord button.
RECord LED flashes while RA226 waits for input.
LED steady indicates RA226 is recording.
Sample will playback automatically when memory is full.
If sample is satisfactory turn MIX control to OP to disable input.
The automatic playback can be stopped if necessary by pressing LOOP
or LATCH.
Playback
Momentary
One Shot
Continuous Loop - Engage both LOOP and LATCH buttons.
Step
- Press FWD or REV buttons for momentary
playback.
- Engage LATCH button first for single touch
playback of entire sample.
- Engage LOOP button only to step through
looped sample.
Advertisement
Table of Contents
